KPD electric flat car motor maintenance and maintenance

1, the motor is in use process, to regularly check the technical condition ofcomponents, timely cleaning dust, may enter the machine body water, dirt anddebris and take prevention and control measures.

Duct 2, motor must SMOOTH OPERATOR, does not have heat source is arranged around the motor, found problems in a timely manner to take measures to prevent.

3, we should always pay attention to abnormal sound of bearing, oil spill and theaxial, radial sloshing overheating phenomenon such as excessive. The problem was found to be processed timely replacement of damaged bearing.

4, under normal circumstances changed every six months grease a. Replace theoil when first using kerosene or gasoline cleaning bearings, grease filled bearing chamber and the 2/3, too much too little adverse lubrication.

5, the motor should be regular maintenance, usually every three months a small biopsy, the annual overhaul once, if the motor winding accident loss, to open thetimely analysis of the causes. Usually pay winding is due to start switching failure or capacitor short circuit; the main winding is due to long too load or startingblockage caused by. The replacement of the motor winding, eliminate the cause of the accident, can be re used.